DMSMS & Standardization Conference 2012 Agenda

This year’s DMSMS & Standardization Conference includes a broad variety of panels, briefings and training on the counterfeiting issue. Here is an excerpt from the official agenda…

Tuesday, November 27, 2012

PANEL: A Look at Counterfeit Electronic Parts Investigations

3:30 PM – 5:00 PM A Look at Counterfeit Electronic Parts Investigations
Moderator: Mr Stephen Gallagher – The Boeing Co
Panel Members: Mr Steven DeMasi – Naval Criminal Investigative Service
Ms Misty Price –
Homeland Security Investigations

Tools, Techniques and Methodology for Counterfeit Avoidance

Session Chair: Mr Sultan Lilani – Integra Technologies
3:30 PM – 4:00 PM Risk on the Rise: Semiconductor Outlook and Counterfeit Activity Forecast
Presenter: Mr Robert Braasch – IHS Inc
4:00 PM – 4:30 PM Counterfeit Detection Technology Assessment
Presenter: Prof Mohammad Tehranipoor – University of Connecticut
4:30 PM – 5:00 PM Confronting Counterfeiting: A Cooperative, Compliant Solution Set
Presenter: Mr Joseph Mueller – BAE Systems

Wednesday, November 28, 2012

Commercial Data Management Tools for Counterfeit Mitigation

Session Chair: Mr Sultan Lilani – Integra Technologies
8:15 AM – 8:45 AM Counterfeit Risk Algorithm & Data Provides a Proactive Approach to Mitigating Risk
Presenter: Mr Jeffrey Williams – SiliconExpert Technologies
8:45 AM – 9:15 AM IHS Parts Management: Counterfeits & Compliance to National Defense Authorization Act (NDAA) Regulations
Presenter: Mr Robert Braasch – IHS Inc
9:15 AM – 9:45 AM Advancements in Early Warning for Counterfeit Alert Notifications
Presenter: Mr Malcolm Baca – QTEC Solutions Inc

Proactive DMSMS Methodologies

9:15 AM – 9:45 AM Non-Compliant or Suspect Counterfeit Packaging Materials Can be Reduced due to Standardization
Presenter: Mr Robert Vermillion – RMV Technology Group LLC

Standards and Policies to Mitigate Counterfeiting

Session Chair: Mr William Pumford – GIDEP
8:15 AM – 8:45 AM AS6174 – Assuring Authenticity of All Types of Materiel
Presenter: Mr Bruce Mahone – SAE International
8:45 AM – 9:15 AM Counterfeit Electronic Parts; Avoidance, Detection, Mitigation, and Disposition
Presenter: Mr Stanley Salot – ECC Corp
9:15 AM – 9:45 AM FY2012 NDAA Section 818 – Implications for Contractors
Presenter: Mr Henry Livingston – BAE Systems

Advanced Methods for Counterfeit Avoidance

Session Chair: Mr Donald Davidson – Office of the DoD-CIO
10:15 AM – 10:45 AM RF-Based PLC IC Design Verification
Presenter: Capt Samuel Stone – USAF
Authors: Dr Rusty Baldwin – USAF, Capt Samuel Stone – USAF, Dr Michael Temple – USAF
10:45 AM – 11:15 AM SST: Secure Split-Test for Preventing IC Piracy and Easy Detection
Presenter: Prof Mohammad Tehranipoor – University of Connecticut
11:15 AM – 11:45 AM Trusted Manufacturing of Integrated Circuits for the Department of Defense
Presenter: Mr Aman Gahoonia – DMEA

Managing the Supply Chain to Mitigate Counterfeiting

Session Chair: Mrs Kristal Snider – ERAI Inc
10:15 AM – 10:45 AM Practical Solutions for Eliminating Risk of Counterfeit Parts
Presenter: Mr Kevin Sink – TTI Inc
10:45 AM – 11:15 AM The Electronic Counterfeiting Problem – Who’s Fault, Is It?
Presenter: Mr Jack Stradley – Jack Stradley Consulting LLC
11:15 AM – 11:45 AM Whatever happened to the Approved Suppliers List?
Presenter: Mr Warren Mathiesen – Lansdale Semiconductor Inc

Executive Panel: Anti-Counterfeiting

1:30 PM – 3:00 PM Executive Panel: Anti-Counterfeiting
Moderator: Mr Gregory Saunders – Defense Standardization Program Office
Panel Members: Mr Nicholas Torelli – OUSD(AT&L)
Mr Paul Peters –
OSD (AT&L)
Mr Michael Shields –
OSD (AT&L)
Ms Leantha Sumpter –
OSD

Developing Enterprise Approaches

4:00 PM – 4:30 PM Impact of Counterfeit Component Testing on the Supply Chain and Program Management
Presenter: Mr David Loaney – Premier Semiconductor Services LLC

Preventative Counterfeit Part Strategies

Session Chair: Mr Bruce Mahone – SAE International
3:30 PM – 4:00 PM Detecting and Preventing Counterfeits at DLA
Presenter: Ms Christine Metz – Defense Logistics Agency
4:00 PM – 4:30 PM Proactive Supply Chain Counterfeit Part Mitigation
Presenter: Mr Jason Voeltz – NUWC Keyport
4:30 PM – 5:00 PM Reporting Counterfeits in GIDEP
Presenter: Mr William Pumford – GIDEP

Test Methods for Counterfeit Detection

Session Chair: Mr Donald Davidson – Office of the DoD-CIO
3:30 PM – 4:00 PM Counterfeit IC Avoidance Techniques for Today’s High Performance Memories and Microprocessors
Presenter: Mr Sultan Lilani – Integra Technologies
Author: Mr Joseph Holt – Integra Technologies LLC
4:00 PM – 4:30 PM Counterfeit Microelectronic Parts and Inspections & Tests That Reveal Them
Presenter: Mr Henry Livingston – BAE Systems
4:30 PM – 5:00 PM Test Methods for Counterfeit Detection
Presenter: Ms Anne Poncheri – Silicon Cert Labs

Thursday, November 29, 2012

Enterprise Level: COTS DMSMS Solutions through Collaboration

8:45 AM – 9:15 AM Sustainable Microcircuit Obsolescence Mitigation / Counterfeit Avoidance and Substantial Cost Avoidance
Presenter: Mr Frederick Shope – Defense Logistics Agency

PANEL: Authentication for Counterfeit Prevention

8:45 AM – 10:15 AM Authentication for Counterfeit Prevention
Moderator: Dr Brian Cohen – Institute for Defense Analyses
Panel Members: Dr James Hayward – Applied DNA Sciences
Capt Samuel Stone –
USAF
Dr Hal Aldridge –
Sypris Electronics

Counterfeit Parts: Tools and Guidance on Avoidance and Detection

Session Chair: Mr Sultan Lilani – Integra Technologies
10:30 AM – 11:00 AM By Joining Forces the Procurement of Counterfeit Parts can be Avoided
Presenter: Mrs Kristal Snider – ERAI Inc
Author: Mr Zachary Collier – US Army
11:00 AM – 11:30 AM Comparison Framework Approach for Counterfeit Detection to Aid in Procurement for the Modern COTS World
Presenter: Mr Saverio Fazzari – Booz Allen Hamilton
11:30 AM – 12:00 PM US Army Engineer Research and Development Center-Risks and Decisions for Counterfeiting
Presenter: Dr Igor Linkov – Us Army Corps Of Engineers

Training

JPL Counterfeit Parts Avoidance: Parts 1 & 2
Instructor: Mr Carlo Abesamis – Jet Propulsion Lab

  • Monday, 1:00 PM – 3:00 PM (Part 1) and 3:30 PM – 5:30 PM (Part 2)
  • Tuesday, 1:00 PM – 3:00 PM (Part 1) and 3:30 PM – 5:30 PM (Part 2)
  • Wednesday, 7:45 AM – 9:45 AM (Part 1) and 10:15 AM – 12:15 PM (Part 2)
  • Thursday, 8:30 AM – 10:15 AM (Part 1) and 10:30 AM – 12:15 PM (Part 2)

Non-Electrical (Mechanical) Counterfeit Material
Instructor: Mr John Butler – NAVSEA SYSCOM

  • Wednesday, 3:30 PM – 5:00 PM
Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: